Removing the outer door handle
1 - external handle; 2 – a tip of draft
Connecting the Spring to the Outer Handle Lever
1 - hook; 2 – draft of the external handle; 3 – lever of the external handle; 4 - spring
1. Remove the lock cylinder.
2. Press the handle 1 (see fig. Removing the outer door handle) to the door panel and disconnect the tip 2 of the rod from the handle 1.
3. Remove the handle from the door by disengaging the hook at the front of the handle from the holder 4 (see fig. Door lock details).
4. Insert the hook on the front of the handle into the holder 4 and insert the handle 6 into place.
5. Press the handle 1 (see fig. Removing the outer door handle) to the door panel and connect the rod tip 2 to it.
6. Check the operation of the lock. If the handle does not return to its original position, then the end of the return spring 4 (see fig. Connecting the Spring to the Outer Handle Lever) jumped out of lever 3. To connect the spring to the lever, insert hook 1 into the hole under the lock cylinder, hook the end of spring 4 with it and insert it into the hook of lever 3.
7. Install the lock cylinder.