The steering mechanism cannot be repaired; in case of a malfunction, it must be replaced as an assembly. When replacing the steering gear, disconnect the tie rods from it.
Tie Rod End Replacement Mounting the steering mechanism on the car (without amplifier) 1 - fork cardan joint; 2 - coupling bolt; 3 - nut; 4 - rotary lever; 5 – a tip of steering draft assembled with a spherical hinge; 6 - locknut; 7 – bolts of...
Removing the steering gear 1. Establish a steering wheel 1 in the position corresponding to rectilinear movement of the car. It is recommended to fix the steering wheel, e.g. with adhesive tape 2. Attention! During repairs, do not turn the...
Steering gear installation Steering gear parts (steering without power steering) 1 - tip; 2 - locknut; 3 - outer clamp; 4 - protective cover; 5 - inner clamp; 6 – steering draft; 7 - pillow; 8 - mounting bracket; 9 - sealant; 10 – a case of the...
Checking and adjusting the position of the steering rack Steering rack position adjustment 1 - steering gear housing; 2 - rail; 3 - cap nut; 4 – steering draft; a = 68.5 mm (steering without power steering); a = 72.5 mm (power steering) Before installing the steering...
Checking and adjusting the clearance between the gear and rack The position of the adjusting bolt in the steering gear housing 1 - adjusting bolt; 2 - crankcase of the steering mechanism; 3 - bolt punching points 1. Raise and secure the front of the vehicle. 2. Turn the steering...
Tie rod replacement Detaching the steering rod from the rack (without amplifier) 1 - steering gear housing; 2 - rail; 3 - cap nut; 4 – steering draft Fastening of a protective cover of the steering mechanism 1 - steering gear housing; 2 -...