Car rear suspension Skoda Fabia 1

Description of the design of the rear suspension
Rear suspension parts with drum brakes 1 – a bolt of fastening of a wheel; 2 – the screw of fastening of a brake drum; 3 – brake drum; 4 - protective cap; 5 - hub nut; 6 - hub; 7 – a bolt of fastening of a board of a...

Removal and installation of a nave of a wheel (drum brake)
Attention! If the hub bearing fails, it is recommended to replace the bearing assembly with the hub. 1. Carefully knock off the protective cap 4 (see fig. Rear suspension parts with drum brakes ) hub nuts and remove it....

Removal and installation of a nave of a wheel (disc brake)
Attention! If the hub bearing fails, it is recommended to replace the bearing assembly with the hub. 1. Carefully knock off the protective cap 5 (see fig. Rear suspension parts with disc brakes ) hub nuts and remove it....

Removal and installation of a pin (drum brake mechanisms)
Attention! Editing the trunnion thread is prohibited. A stud with a damaged thread must be replaced. 1. On vehicles with ABS, disconnect the wire from the terminal «-» battery, disconnect the block with wires from the...

Removal and installation of a pin (disc brake)
Attention! Editing the trunnion thread is prohibited. A stud with a damaged thread must be replaced. 1. On vehicles with ABS, disconnect the wire from the terminal «-» battery, disconnect the block with wires from the...

Removal and installation of the shock absorber
1. Install the ties on the spring 31 (see fig. Rear suspension parts with drum brakes ) rear suspension on the side of the shock absorber being removed and slightly compress the spring. In the absence of a tie, the...

Removal and installation of a spring
Attention! Both springs of the vehicle's rear suspension must be of the same hardness group and must be replaced as a set on both sides of the rear suspension. Spring stiffness groups are marked with paint. Install a...

Removal and installation of a back suspension bracket
Remove the rear suspension completely from the vehicle only to replace a damaged beam or replace the body. You can repair or replace all other elements of the rear suspension without removing it from the car. 1....