Rear suspension parts with drum brakes
1 – a bolt of fastening of a wheel; 2 – the screw of fastening of a brake drum; 3 – brake drum; 4 - protective cap; 5 - hub nut; 6 - hub; 7 – a bolt of fastening of a board of a brake; 8 - brake assembly; 9 - cable holder; 10 – parking brake cable; 11 - bracket; 12 – a bolt of fastening of an arm; 13 - pressure regulator; 14 – a bolt of fastening of a regulator; 15 – a bolt of fastening of a loading spring; 16 - spring holder; 17 - rubber-metal support; 18 - rear axle beam; 19 - axis trunnion; 20 - brake tube; 21 - rear suspension beam (version); 22, 29 - nuts; 23 – a bolt of the bottom fastening of the shock-absorber; 24 - wheel speed sensor; 25 - plug (for vehicles without ABS); 26 – sensor fastening bolt; 27 - lower spring gasket; 28 – a bolt of fastening of a beam of the back bridge; 30 - rear suspension mounting bracket; 31 – rear suspension spring; 32 - the upper gasket of the spring; 33 – a bolt of the top fastening of the shock-absorber; 34 - shock absorber; 35 - shock absorber holder
Rear suspension parts with disc brakes
1 - shoe guide with caliper assembly; 2 – a bolt of fastening of a wheel; 3 – the screw of fastening of a brake disk; 4 - brake disc; 5 - protective cap; 6 - hub nut; 7 - hub; 8 – a bolt of fastening of a board of a brake; 9 - brake shield; 10 - cable holder; 11 – parking brake cable; 12 - spring holder; 13 - rubber-metal support; 14 - rear axle beam; 15 - axis trunnion; 16 – a bolt of fastening of directing pads; 17 - brake tube; 18, 24 - nuts; 19 – a bolt of the bottom fastening of the shock-absorber; 20 - wheel speed sensor; 21 – a bolt of fastening of the gauge; 22 - lower spring gasket; 23 – a bolt of fastening of a beam of the back bridge; 25 - rear suspension mounting bracket; 26 - rear suspension spring; 27 - upper spring gasket; 28 – a bolt of the top fastening of the shock-absorber; 29 - shock absorber; 30 - shock absorber holder
The rear suspension is semi-independent, lever-spring, with trailing arms pivotally mounted on the car body and interconnected by a U-shaped transverse beam. The trailing arms are connected to the body with silent blocks. Suspension springs are twisted, with a reduced diameter of the end coils. To prevent noise and vibration from being transmitted to the body, the upper and lower ends of the springs rest on elastic supports.