Washer reservoir
1 - hose; 2 - pump; 3 - connecting block; 4 - tank
Washer reservoir
1 - nut; 2 - tank
The washer pump is a non-separable structure and must be replaced in case of any defects.
Attention! Do not turn on the pump motor if the pump intake is not immersed in liquid - the motor may burn out (short-term switching on for 1–2 s is allowed to check the operation of the electric motor).
1. Disconnect the wire from the terminal «-» battery.
2. Remove the front buffer.
3. Disconnect block 3 (see fig. washer reservoir) with wires from the pump motor 2.
4. Disconnect hoses 1 from pump 2.
5. Loosen two nuts 1 (see fig. washer reservoir) washer reservoir.
6. Remove the washer reservoir 2 and drain the liquid from it.
7. Carefully prying with a screwdriver, remove the pump from the washer reservoir.
8. Reinstall the washer reservoir with pump in reverse order and fill it with fluid.