The air conditioner only works when the engine is running, the heater core is on and the ambient temperature is above 0°C.
The conditioner automatically maintains the set temperature in salon.
When the air conditioner is running, condensate from the evaporator may drain under the vehicle. This is not a malfunction.
Please note that the air conditioner consumes part of the engine power during operation and, therefore, increases fuel consumption. Therefore, try to comply with the following conditions:
- if the car was in the sun and got very hot, before turning on the air conditioner, ventilate the interior;
- do not open windows while the air conditioner is running;
- do not turn on the air conditioner unless absolutely necessary.
Interior cooling
1. Handle 1 (see fig. Heater control panel) set the desired temperature.
2. Set knob 3 to position
.
3. Open the center 3 (see fig. The flow of air into the cabin) and side 4 nozzles on the instrument panel.
4. Turn on the air conditioner by pressing button 4 (see fig. Heater control panel).
Attention! Direct the air flow to the upper part of the cabin (over the heads of the passengers) and do not turn on the recirculation system. In this mode, cooled outside air enters the passenger compartment.
Attention! To cool the interior faster, switch on the recirculation system for a short time by pressing button 5. In this mode, constantly cooling, air circulates from the passenger compartment.