![](https://www.skodabook.ru/img/fabia/0136.jpg)
C – an opening of the block of cylinders; 1 - label (arrow) on the rear cover of the camshaft drive belt must match the depression between the two protrusions on the camshaft pulley hub; 2 - the MP-301 device must enter the holes of the pulley and block head; 3 - fixture T10050 for installation at TDC of the crankshaft must enter hole C of the cylinder block, while the marks on the fixture and the pulley must match
The piston of the first cylinder is set to the TDC position of the compression stroke in the same way as the piston of a gasoline engine (see subsection 2.2.1).
The TDC marks of the 1.9l, 74kW TDI diesel engine are shown in the figure.