Disassembly and assembly of the door lock
1. Remove the outer door handle.
2. Remove door molding.
3. Remove the power window device.
4. Unscrew screws 1 (tightening torque = 8 Nm).
5. Loosen the fixing screws 2 of the door reinforcement and lower the door reinforcement down.
(The front mounting screw is not shown in the figure).
6. Having unhooked the retaining clip 4 of the control rod 3, pull out the door lock together with the rod 5 and the control rod 3 through the mounting hole out of the door.