Note: Before removing the frame, mark its installation position. 2 people are required to remove the frame. One mechanic loosens the screws while the second mechanic holds the frame and removes it from the vehicle.
The ceiling has been removed. Sunroof cover has been removed. Mark installation position of rocker guide frame -1- in relation to sunroof frame.
First unscrew rear screws -arrow- on frame.
Carefully! When removing, the screws -arrow A- remain screwed in for the time being.
Release screws -arrow-. Hold the frame and only then release the screws -arrow a-. Remove the frame through the opening of the trunk lid.
Installation
Install the part according to the marks made before removal and fix it with screws. Tighten the screws alternately from front to rear to the prescribed torque.
Removing and installing drain hoses
Drain hose -1-. Mounting clamp -2- (mounted on the rear rail). Fixing angle connector -3-. Mounting clamp -4- (glued to the side). Drain valve -5- (in a hole in the side). Lower the shaped ceiling. Remove luggage compartment side trim, Remove clips -2 and 4-. Remove the drain hose from the body.
Installation
Installation in reverse order.
Carefully! Make sure that the drain hose is not kinked!
Cleaning drain hoses
Note: We recommend using a flexible wire as a tool for cleaning.
Cleaning is done by removing debris from the drain valve and purging the drain hose with the drive cable.