Note: When replacing parts, the applicability must be taken into account; the simultaneous installation of parts from different manufacturers is not permitted. The following picture shows the production evaporator body "Valeo".
1. Evaporator body - bottom
2. Evaporator: only on vehicles with air conditioning; make sure that the foam pads are not damaged; check if they are glued correctly
3. Seal: only on vehicles with air conditioning; replace; lubricate with refrigerant oil before installation
4. Mounting plate: only on vehicles with air conditioning
5. Expansion valve: only on vehicles with air conditioning
6. Screw: only on vehicles with air conditioning; 2 pieces, 10 Nm
7. Seal/insulation: on vehicles without air conditioning, the seal has no opening
8. Seal: only on vehicles with air conditioning; replace; lubricate with refrigerant oil before installation
9. Screw. 8 pieces: 1.5 Nm
10. Evaporator body - top
11. Air supply limiter: only on vehicles without air conditioning