Vehicles with interior monitoring system
Remove motion sensor and vehicle inclination sensor (depending on vehicle configuration).
All vehicles
Remove the front dome light. Detach the storage compartment on the ceiling. Loosen the storage compartment frame screws (1.5 Nm). Detach storage compartment frame. Detach headliner -1- at rear and release catch -2-.
Detach ceiling panel -1- from door seals. Carefully lower roof panel -1- with the help of a 2nd mechanic (rift danger).
Pull roof panel out through boot lid opening.
Installation
Installation in reverse order.
Instruction. Before installation, check all fastening elements for damage and replace if necessary.
Check that the ceiling panel is in the frame of all door seals after installation.
Removal and installation of the ceiling panel (Combi)
Switch off the ignition and all electrical consumers. Remove sun visor. Remove the upper A-pillar trim. Remove the upper B-pillar trim. Remove the C-pillar trim. Remove the D-pillar trim. Remove the roof rails. Remove rear seat. Remove the rear seat back. Fold back the front seats. Lower the steering wheel to the lowest position.
Vehicles with interior monitoring system
Remove motion sensor and vehicle inclination sensor (depending on vehicle configuration).
All vehicles
Remove the front and rear dome lights. Detach the storage compartment on the ceiling. Loosen the screws of the storage compartment frame (1.5 Nm). Detach storage compartment frame, Detach roof panel -2- at rear and unlock catch -1-. Detach roof panel -2- from door seals. Carefully lower roof panel -2- with the help of a 2nd mechanic (rift danger).
With the help of a 2nd mechanic, remove the ceiling panel through the tailgate opening.
 |  |
Installation
Installation in reverse order.
Note: Before installation, check all fastening elements for damage and replace if necessary.
Check that the ceiling panel is in the frame of all door seals after installation.