1. 8 Nm: self-locking; replace after disassembly
2. Oil level and oil temperature sender -G266-
3. O-ring: replace after disassembly
4. Oil drain plug, 30 Nm: with integral O-ring; replacement
5. O-ring: part of the drain plug
6. Bolt
7. Oil pan
8. O-ring: replace after disassembly
9. 10 Nm + tighten by 180° (½ vol.): replace after disassembly
10. Oil pump: with vacuum pump
11. Centering sleeve
12. Toothed belt
Carefully! Avoid kinking, twisting or damage to the toothed belt on sharp edges!
13. Sealing gasket: replace after disassembly
14. Centering sleeve
15. Cylinder block
16. O-ring: replace after disassembly
17. Oil pressure control valve -N428-
18.8 Nm
19.8 Nm
20. Oil dipstick guide tube
21.8 Nm
22. O-ring: replace after disassembly
23. 8 Nm and tighten by 90° (¼ vol.)
24. Calm
25. Oil pickup
Oil pan - tightening torque and order
Tighten the screws in stages as follows.
