Note: When replacing the parking light bulb (-pos. 4-) do not remove the lamp bracket. To remove, turn the bulb holder to the left and remove it.
Release screws -arrow-. Unplug connector -1- and remove lamp bracket.
General installation scheme for incandescent lamps
1. Reversing light bulb P21W02B, 21W)
2. Bulb for brake light and side light P21W (12 V, 21 W)
3. Turn signal bulb PY21W (12 V, 21 W)
4. Incandescent lamps for side light W5W (12V, 5W)
5. Incandescent lamp for the rear fog lamp and side light H21W (12 V, 21 W)
Installation in reverse order.
Note: Check the lamp brackets for damage to the seals.
Taillight with LEDs - Octavia
Note: The LED module is integrated in the lamp and cannot be replaced separately.
Release screws -arrows-. Pull out the lamp holder.
General installation scheme for incandescent lamps
1. P21W reversing light bulb (12 V, 21 W)
2. Turn signal bulb PY21W (12 V, 21 W)
3. Bulb for rear fog light H21W (12 V, 21 W)
LED module - brake light and parking light. Installation in reverse order.
Note: Check the seal for damage. When installing the cartridge, insert the cable going to the LED module into the lamp so that it is not pinched between the cartridge and the lamp body. The LED module is built into the flashlight and cannot be replaced individually.