Attention! Make sure that when locking the vehicle, there are no people in it from the outside, since it will be impossible to lower the windows from the passenger compartment if necessary. The system has a force limiting function. If there is an obstacle, the closing process is suspended and the glass lowers a few centimeters. However, care must be taken when closing the windows - risk of injury! If there are children in the back seat, it is recommended to turn off the power window buttons in the rear doors (switch S). The power window mechanism is equipped with overheating protection. If the glass is repeatedly opened and closed, this protection may work. This leads to temporary blocking of the power window mechanism. As soon as the mechanism has cooled down and the overheating protection has turned off, the glass can be opened and closed again.
Lowering and raising windows from the driver's seat
Buttons on the driver's door
Power window buttons
A. Driver's door power window button
B. Front passenger's window switch
C. Rear Right Power Window Switch
D. Rear Left Power Window Switch
S. Rear power window switch
Opening
Lightly press the corresponding key and hold until the glass is lowered to the desired position. When the button is released, the window stops immediately. In addition, by briefly pressing the button to the stop, the window can be completely lowered in automatic mode. Pressing the button again stops the glass.
Closing
Slightly pull the corresponding button up and hold until the glass is raised to the desired position. When the button is released, the window stops immediately. In addition, by briefly pulling the button to the stop, you can fully raise the glass in automatic mode. When you pull the button again, the glass stops.
The switch of buttons of power windows of back doors
By pressing switch S, you can deactivate the power window buttons in the rear doors. By pressing switch S again, the buttons for the rear windows are reactivated. If the rear door buttons are disabled, the contra lamp S of the emergency switch S is on.
Lowering and raising windows in the front passenger door and rear doors
Button location on the front passenger door
The buttons for the respective power window are located in the front passenger door and in the rear doors.
Opening
Lightly press down on the corresponding key and hold the key down until the window is lowered to the desired position. In addition, you can fully lower the window automatically by briefly pressing the bottom of the button. When the button is pressed again, the window stops immediately.
Closing
Slightly pull the corresponding button up and hold the button until the glass is raised to the desired position. In addition, you can fully raise the glass automatically by briefly pressing the top of the button. When the button is pressed again, the window stops immediately.
Force limitation
The power window system has a force limiting function. This feature reduces the risk of pinching and injury when closing the windows. In the presence of an obstacle, closing is suspended and the glass lowers a few centimeters. If an obstacle prevents the window from closing for the next 10 seconds, closing is interrupted again and the window lowers a few centimeters. If you try to close the window again within 10 seconds of lowering the window again, even though the obstruction has not been removed, the lift will be blocked. In this case, the automatic window lifting is not possible, the force limiting function remains active. The force limit will only deactivate when you try to close the glass again within the next 10 seconds - the glass will now close with full force! If more than 10 seconds elapse, the force limiting function will reactivate.
Comfortable window controls
When unlocking or locking the vehicle, the comfort window opening and closing function can be used in the following way: Setting the comfort window operation. A prerequisite for the correct operation of the convenience function for the power windows is that the function of automatically lowering and raising all windows is functional. Opening/closing can take place in one of the following ways.
Opening
Press the key with the symbol on the key and keep it pressed. Hold the key in the driver's door lock in the unlock position. Hold A key
(1) in the opening position.
Closing
Press the
key with the symbol on the key and keep it pressed. Hold the key in the driver's door lock in the locked position. Hold A (1) in the closing position. With the KESSY system, keep your finger on sensor 1. By releasing the key or button A, you can immediately interrupt the process of lowering or raising the windows. The convenience opening or closing of the windows with the key in the driver's door lock is only possible within 45 seconds after the vehicle has been locked.
(1) The convenient opening and closing of the windows using button A is possible immediately after unlocking the vehicle, switching off the ignition and opening the driver's or front passenger's door.
Failure in work
The automatic windows do not work when the vehicle battery terminals are disconnected and reconnected with the windows down. The system needs to be activated.
Activation process
Turn on the ignition. Pull the top edge of the corresponding power window button and raise the window. Release the key. Pull the same key again and hold it in the up position for about 3 seconds.