Note: When the battery is disconnected, the maintenance indicator data is saved. In case of repair work related to the replacement of the instrument cluster, it is necessary to set the correct value of the maintenance interval counter. This work is carried out at the service station. In the version for some countries, the indication is displayed in the English system of measures.
Maintenance messages
Before the next maintenance period, the display, after turning on the ignition, shows the
symbol, as well as the message: «M» Oil change in... days «S» OIL CHANGE IN... DAYS
or
«M» Inspection service in... days «S» INSPECTION SERVICE THROUGH...DAYS.
The remaining km or remaining days indicator counts down to the service interval in 100 km increments or one day.
Messages at the time of maintenance
As soon as the service interval is reached, the display shows the symbol and, for example, the following message after switching on the ignition: «M» An oil change is required! «S» OIL CHANGE REQUIRED!
or
«M» Req. conducting an inspection serv.! «S» REQUIRED CONDUCTING INSP. SERV.!
or
«M» Oil change and inspection service required! «b» OIL CHANGE AND INSPECTION SERVICE NEEDED!
Indication of mileage and time left until the next maintenance
Turn on the ignition. Press and hold key 6 until TO is shown on the display. Release key 6. The display will show
and, for example, the following message: «M» MOT in... km or,., days. «b» THEN IN... KM OR... DAYS.
Resetting the maintenance indicator
If a variable service interval is set in the vehicle, then after resetting the TO indicator, the variable service interval is replaced by a fixed one. Therefore, it is recommended that the reset be carried out only at a workshop whose employees will carry out a reset using a diagnostic tester.
Resetting the oil change service indicator
Turn off the ignition (on vehicles with the KESSY system, all doors, the luggage compartment and the bonnet must also be closed). Press and hold key 6. Switch on the ignition. The following message appears: «M» Reset the oil change indicator? «S» RESET IND. THAT
Release and press the 6 key again.
Resetting the inspection service indicator
Turn off the ignition (on vehicles with the KESSY system, all doors, the luggage compartment and the bonnet must also be closed). Press and hold key 6. Switch on the ignition and hold key 6 pressed until the following message appears: «M» Reset indicator insp. service. «S» RESET IND. THAT
Release and press the 6 key again.
Carefully! Resetting the maintenance indicator yourself is not recommended. Otherwise, the indicator may be set incorrectly, which will lead to malfunctions in the vehicle.