Note.
- Park the vehicle on a level, level surface.
- The door is properly adjusted if it opens and closes without undue effort, and also if there is a uniform gap along its perimeter with the doorway, if the door is not deep and does not protrude relative to the body panels.
- After performing work on adjusting the position of the rear door on the fastening elements (mounting bolts and screws) it is necessary to apply a layer of anti-corrosion coating.
1. To adjust the position of the rear door relative to the doorway, you must first loosen the bolts and fastening screws (2), (5), (7) And (8). To unscrew the fastening screw (5). Remove the center pillar trim panels (for details, see the relevant section in this chapter).
2. Loosen the mounting bolts (3) And (9).
3. Adjust the location of the door relative to the doorway of the body.
