Removing
1. Remove the plug (2) from the tailgate housing, as shown in the figure below.
2. Install special tool (T10389) into the door, approximately 38 mm, so that the end of the fixture is under the fixing hooks (3) on the mounting bracket as shown in the figure below.
3. Pull special tool (Т10389) in the direction of the arrow until the grips disengage.
4. Pull the door handle (2) in the direction of the arrow «A», as shown in the figure below.
5. Pull the door handle cover (1) in the direction of the arrow «b», to detach from the support bracket.
Installation
1. Pull the door handle (2) in the direction of the arrow «A», as shown in the figure below.
2. Press on the cover (1) and press against the support, in the direction of the arrow «b», as shown in the figure below.
3. Install a suitable flat head screwdriver (4) into the fastener hooks (3) mounting bracket as shown in the figure below.
4. Press on the cover (1) door handles.
5. Press the screwdriver on the latches, moving it in the direction of the arrow, until the latches lock.
6. Install the service port plug (5), shown in the figure below.
