Note.
- The cabin air filter can be replaced without removing and installing any interior trim panels.
- The filter and mounting frame form one spare part and are replaced as a unit.
Removing
1. Move the latches (1) as far as it will go in the direction of the arrows, as shown in the figure below.
2. Pull and remove the filter cover (3) down as shown in the figure below.
3. Disconnect from the latches and, pulling downwards, remove the cabin filter from the housing.
Installation
Installation is carried out in the reverse order of removal.
Before installing the filter, check that it is correctly positioned in the frame. The top and bottom edge of the filter must be in the frame.
The frame grill must be directed towards the air distributor body.
filter cover (3) must be properly installed in the housing, and the latches (1) must be pulled apart.