Removing
1. Turn off the ignition and all electrical consumers.
2. To remove the panel of facing of the lever of a gear change.
3. Remove armrest assembly (if the car is equipped).
4. Remove cover (6), shown in the figure above.
5. Unscrew the fastening screws (2), shown in the figure above.
6. Apply the parking brake by raising the parking brake lever as far as possible.
7. Detach and remove the handle (3) from the parking brake lever.
8. Press the center console about 30 mm in the direction of arrow A to release it from the holders on the dashboard, as shown in the figure above.
9. Raise and remove the center console from the passenger compartment floor in the direction of arrow B, as shown in the figure above.
10. Disconnect the cigarette lighter wiring harness connector (power output).
11. Remove the center floor console from the car.
Installation
Installation is carried out in the reverse order of removal.