Removing
1. Remove the rear seat belt guide (for details, see the relevant section in chapter Passive safety).
2. Disconnect the backrest of the rear seat on both sides from the fastening elements. Lower the rear seat back completely.
3. Remove the clamp cover.
4. Unscrew the fastening screw (1), then remove the clamp (3) from a support (2), as shown in the figure below. Mounting screw tightening torque, when installed: 9 Nm.
5. Detach the seatback from the central fastener (arrow A), as shown in the figure below.
6. Move the back of the rear seat and remove from the support bolts (arrow B), as shown in the figure below.
Installation
Installation is carried out in the reverse order of removal.