Temperature control
- If you wish to increase the temperature, turn the setting knob (A) to the right.
- If you wish to lower the temperature, turn the setting knob (A) to the left.
Ventilation regulation
- If you want to turn on the fan, turn the switch (IN) in one of positions 1-4.
- If you want to turn off the fan, turn the switch (IN) in the provisions "0".
- If you want to shut off the fresh air supply, use the button (1) - air recirculation.
Air distribution control
- The air supply to the individual blower nozzles is adjusted by the setting knob (WITH).
Note.
- In order for the heating and ventilation system to work flawlessly, the outside air intake in front of the windscreen must not be clogged with ice, snow or leaves.
- The heat output depends on the temperature of the coolant. This means that full heat output can only be achieved after the engine has warmed up.
- Keep the fan on at all times to prevent the windows from fogging up.
Attention. Never use the air recirculation mode for a long time, as there is no fresh air from outside and "consumed" air can be tiring, distracting, and can also cause windows to fog up. This may increase the risk of an accident. As soon as the windows begin to fog up, immediately turn off the air recirculation mode.
Note:
- In the case of setting the air flow to the windows, the full heating capacity is used to defrost the windshield. In this case, no air is supplied to the floor area. This can lead to a deterioration in heating comfort.
- Ventilation of the interior space of the car is provided through the holes located in the rear section of the trunk of the car.