- safe and quick access to controls;
- relaxed, non-fatiguing posture;
- maximum protective action of the seat belts and the Airbag system.
Attention.
- Never carry more persons than there are places to see.
- Each passenger must be properly fastened with the seat belt belonging to his seat. Children must be protected by suitable restraints to keep the child in the seat.
- The front seats, head restraints and seat belts must always be adjusted to the height of the person in order to provide you and your passengers with the ideal degree of protection.
- Always keep your feet in the footwell while driving - never put them on the dashboard, in the windows or on the seats! It rides especially the front seat passenger. Otherwise, you are exposed to an increased risk of injury when braking or in the event of an accident. If the airbag system is triggered, it is possible to get injured with a fatal outcome if you sit incorrectly!
- It is important that both the driver and front seat passenger maintain a distance of at least 25 cm from the steering wheel and therefore from the instrument panel at all times. If this minimum distance is not respected, the airbag system may not have its protective effect - in If tripped, it can be life-threatening! In addition, the position of the front seats and head restraints must always be correctly adjusted to the height of the person sitting on it.
- Do not put any objects in the footwell, as in the event of a sudden maneuver or braking, they may fall on the pedal area. Subsequently, it may happen that you will not be able to squeeze the clutch, brake or add gas.
Front seat adjustment
Adjusting the longitudinal position of the seat
- Pull lever 1 (located closer to the inner edge of the seat) up and slide the seat to the desired position.
- Release lever 1 and slide the seat until it clicks into place.
Seat height adjustment
- If necessary, raise the seat. swing lever 2 up.
- If you need to lower the seat, swing lever 2 down.
Seat back tilt adjustment
- Unload the seat back (don't fall for it) pull lever 3 back and set the desired backrest inclination by leaning back or leaning forward.
- After releasing lever 3, the backrest will lock into the selected position.