16.1 Details of fastening of a beam of the panel of devices
1 connecting bracket
2 Nut, 20 Nm
3, 8 Bolts, 20 Nm
4 Bolts, 4.5 Nm
5 Bolts, 4.5 Nm
6 Dashboard beam
7 Bolt, 2 Nm
9 Bracket
10 Bolts, 9 Nm
11 Bolt, 25 Nm
2. Remove the dashboard (see Section 15).
3. Remove the knee airbag (see chapter 12).
4. Remove a branch pipe of air supply on a windshield.
5. Disconnect the ignition switch connector.
6. On models with xenon headlights, remove the cornering light and headlight tilt control unit (behind the center console).
7. Turn out bolts of fastening of the holder of the relay and safety locks.
8. Turn out bolts of fastening of a steering column (see chapter 10).
9. Turn out bolts (7 and 8) support fastenings. Give nuts (5), remove the bolt (11) in the air chamber.
10. Turn out bolts (10 and 4) and give nuts (2). Remove a beam of the panel of devices from bolts and take from the car.