Siren and horns

1. High frequency (H2) and low frequency (H7) klaxons are installed in front, at the left and right spars, behind the fog lights. To remove the horn, remove the corresponding fog lamp (see Section 6), disconnect the horn connector (see illustration 8.1a), remove the bolt (see illustration 8.1b) and remove the horn together with the holder. If necessary, after that, you can give the nut and remove the horn from the holder. When installing, tighten the horn nut to 14 Nm and the holder bolt to 20 Nm.





2. To remove the siren (H12) anti-theft alarm, remove the right windshield fairing and cover the climate system inlet cover to prevent chips from entering it. Drill bolt (1 per resist. illustrations), remove it, disconnect the siren connector and remove it together with the holder. If necessary, give the nut and remove the siren from the holder. Installation is carried out in the reverse order. Use a new shear bolt. Tighten the siren fastening nut to the holder with a force of 5 Nm.