Clutch Specifications Common parameters System type With one dry disc with diaphragm spring, cable actuation and F&S, Trnava or TAZ torsional vibration damper Release bearing type PLC 04-23 (under license from Valeo) Ø disc friction linings,...
General clutch information Clutch 1 - Flywheel; 2 - Clutch disc (friction); 3 - Crankshaft; 4 - Pressure plate; 5 - Diaphragm spring; 6 - Friction disc hub The clutch consists of a friction disc, more commonly referred to as a clutch disc, a...
Removal and installation of the clutch pedal Clutch Pedal Components 1 - Cable retainer; 2 - Clutch cable; 3 - Clutch pedal; 4 - Spring; 5 - Axle lock Right Hand Drive Models Note. It is possible to replace the axle bushings of the clutch pedal without dismantling...
Removal, installation and adjustment of the clutch cable Removing 1. Disconnect the negative cable from the battery. 2. In the passenger compartment under the instrument panel, disconnect the auxiliary spring from the clutch drive cable. Remove the retainer and disconnect the...
Removing, checking the condition and installing the clutch assembly Warning! Remember that the dust produced during the wear of friction linings can contain asbestos, which is extremely harmful to human health! Never blow off dust with compressed air. Do not use petroleum-based solvents...
Removing, checking and installing the clutch release mechanism Clutch Release Components 1 - Shutdown lever; 2 - Spring anchor; 3 - Spring; 4 - bushing of the shutdown lever; 5 - Fork of the clutch release lever; 6 - Retaining ring; 7 - Screw; 8 - Release bearing; 9 - Pin 4x10; 10...