Vehicle drive shafts Skoda Felicia

Drive Shaft Specifications
Lubricant (only overhaul - see text) Type Outer CV joint Shell GL245VMO or SWC 423MB* Internal CV joint Shell GL240 or SWC 423B* Amount of grease per hinge, g Outer CV joint 80 Internal CV joint 100 *For more...

Description of the design of drive shafts
Drive shaft design 1 - Outer CV joint; 2 - Retaining ring; 3 - Bandage tape for fastening the protective cover; 4 - Protective cover; 5 - Drive shaft; 6 - Protective cover; 7 - Crosspiece of the tripod assembly of the...

Removal and installation of power shafts
Removing Note. Reassembly will require a new hub nut as well as a replacement lower arm ball joint pinch bolt nut. 1. Remove the rim/hub trim cap, then loosen the hub nut and wheel nuts. 2. Chock the rear wheels, apply...

Replacement of rubber protective covers of CV joints of drive shafts
1. Remove the drive shaft (see Section Removal and installation of power shafts ) and the corresponding CV joint. Outer CV joint 2. Clamp the drive shaft in a vice with soft jaws and release the bandage tapes securing...

Removal and installation of a vibration damper of the right power shaft
Removing 1. Firmly apply the parking brake, then jack up the vehicle and place it on jack stands. 2. Remove the mounting screws, split the vibration damper assembly into two halves and remove them from the shaft. 3....

Overhaul of drive shafts — general information
If during the checks there are signs of wear of the CV joints of the drive shafts, remove the decorative caps of the rims / hubs and check the correct tightening torque of the hub nuts. If any of the nuts is loose,...